Monthly Archives: March 2020

Fix iPhone X Touch Screen Not Working Problem

Some iPhone X users have complained that their touch screen does not work. Touch screen problems can occur mainly due to some minor software glitches. Though this is quite annoying, it can be fixed easily.

Tip: You need to update the iOS with the latest version to avoid getting such problems in future. The process to update the iOS is described below.

Update the iOS

If touch screen issues are there, you need to fix that issue first, by any of the methods given under the sub-heading “How to Fix iPhone X Touch Screen Not Working Problem”. You have to then update the iOS to avoid further errors in the future.

  • Connect the device to a computer or laptop with iTunes installed.
  • Open iTunes and select your device.
  • Tap on “summary”.
  • Then, tap on “Check for Update”.
  • Click on “Download and Install”, if there are any updates available. You may be asked to enter the pass code.
  • Wait for the update to be completed.

How to Fix iPhone X Touch Screen Not Working Problem?

Fix iPhone X Touch Screen Not Working Problem

iPhone X touch screen not working problem can be fixed different methods. Some of the fixes are listed below.

1. Swipe up from the White Horizontal Bar at the Very Bottom of the iPhone X’s Touch Screen

Swipe up on the touch screen should be done properly. Otherwise, the screen will not be unlocked. If Face ID works, follow the instructions given below.

  • The message “swipe up to open” will be displayed on the touch screen.
  • Swipe up from the white horizontal bar at the very bottom of the touch screen.
  • Check if the touch screen issue is resolved or not.

2. Remove Case or Anti-Glare Screen Covers

Touch screen functionality may be blocked by the case or anti-glare screen covers in some cases. To fix this issue, do the following.

  • Remove any case or Anti-Glare screen cover.
  • Check if the touch screen issue is resolved or not.

3. Force Restart

Force Restarting the iPhone X can resolve touch screen issues in a large number of cases. Force restarting is to be done as follows.

  1. Press and immediately release the volume up button.
  2. Press and immediately release the volume down button
  3. Then, press and hold down the side button on the mobile device until the Apple logo appears. This may take anywhere between 10 to 15 seconds.
  4. Check if the iPhone X touch screen issue is resolved or not.

Note: Instead of step 1 and step 2, you may press the Home and On/Off buttons simultaneously.

4. Charge the Device

Sometimes, by charging the iPhone X touch screen issues can be resolved. Charging needs to be done as follows.

  • Connect the iPhone X mobile device to its charger unit.
  • Connect the charger unit to the power socket. Then, switch on the power line.
  • Wait for around 60 minutes or so. If the charging icon is not displayed within this period, check and confirm that the USB cable, cable, jack, etc, are firmly connected.
  • Check if the touch screen issue is resolved or not.

5. Move to a Different Area / Cover with a Warm Cloth

Sometimes, a sudden drop in temperature can cause the touch screen issues. To fix this problem, do the following.

  • Move to a different area or room.
  • Check if the touch screen issue is fixed or not.
  • If the issue is not resolved, cover the mobile device with a blanket or piece of cloth for a few minutes.
  • Check if the touch screen issue is fixed or not.

6. Device Firmware Update

Device Firmware Update can fix the touch screen issues. The Device Firmware Update (DFU) is explained below.

  1. Connect the iPhone X mobile device to a computer or laptop with the iTunes app installed.
  2. Open the iTunes app.
  3. You need to press and quickly release the Volume Up button, followed by pressing and quickly releasing the Volume Down button.
  4. Then, press and hold the side button, until the recovery-mode screen is displayed on your touch screen.
  5. Locate and select your device name.
  6. A menu with the following three options will be displayed to you; “Cancel”, “Restore” or “Update”.
  7. Select “Update” from the displayed menu. Your computer or laptop will now reinstall the device software within the next 15 minutes or so.
  8. Check if the iPhone X touch screen issue is fixed or not.

7. Restoring Device Firmware

Restoring the Device Firmware may the last resort if all the other methods failed to fix the touch screen issue.

Caution: Restoring device firmware causes all data on your mobile device to be lost.

  1. Connect the iPhone X mobile device to a laptop or computer with the Apple iTunes app.
  2. Open the Apple iTunes application.
  3. Then, press and quickly release the Volume Up button. Then, press and quickly release the Volume Down button.
  4. Then, press and hold the side button until the recovery-mode screen is displayed.
  5. Locate and select the iPhone X device name in iTunes.
  6. A menu with the following three options will be displayed; “Cancel”, “Restore” or “Update”.
  7. Select “Restore”.
  8. Your computer or laptop will reset the iPhone X device software to the factory settings, within the next 15 minutes or so.
  9. Check if the iPhone X touch screen issue is resolved or not.

Conclusion: iPhone X Touch Screen not working problem has been reported by some iPhone X users. The causes of the error are different for different users; though the main cause is software-related glitches.

iPhone X touch screen problems can be fixed easily in most of the cases. Swiping up from the very bottom of the touch screen is one method to fix touch screen issues. By removing the case or anti-glare screen cover, touch screen issues can be resolved in some cases. Force restarting the iPhone X is another method to fix touch screen issues. Sometimes, by charging the mobile device, touch screen issues are resolved on its own.

By taking the device to another area or by wrapping the device in a warm cloth can also fix touch screen issues in some cases. The Device firmware update process can also fix touch screen issues.

The last method to fix the touch screen issue is by going in for the Device Firmware Restoration. This causes all data on your iPhone X to be lost.

Fix iPhone X Won’t Swipe Up Problem

Some iPhone X users have complained that their device won’t swipe up. It is quite annoying when this occurs, as your display is locked. Then, you can not do anything using your iPhone X. Making or receiving calls and messages, apps, camera, etc, are locked if the swipe up does not work.

Minor software problems or bugs are the most common cause of this error. Many a time, such swipe up issues are caused by outdated iOS. You need to update the iOS with the latest version to fix such issues. The process to update the iOS is described below.

Update the iOS

If the display swipe up issue is there, first you need to fix that issue by any of the methods given under the sub-heading “How to Fix iPhone X Won’t Swipe Up Problem”. Then update the iOS as explained below.

  • Go to the settings app.
  • Select “General”.
  • Select “Software Update”.

How to Fix iPhone X Won’t Swipe Up Problem

Fix iPhone X Won't Swipe Up Problem

1. Swipe up from the White Horizontal Bar at the Very Bottom of iPhone X’s Screen

The swipe up should be done properly to avoid errors. This is explained below.

I. If Face ID Recognition Works

  • Your iPhone X will show the message “swipe up to open“.
  • Swipe up from the white horizontal bar at the very bottom of the display screen.
  • Check if the Swipe up issue is resolved or not.

II. If Face ID Recognition does not Work

  • Your iPhone X will display a message “swipe up to unlock“. On the top portion of the display screen, the lock symbol will be displayed.
  • Move to another location which is brightly lit, so that the iPhone X device can recognize your face.
  • If the device recognizes your face now and then swipe up issue is still not fixed, try any of the fixes given in this article.
  • If the face ID is still not recognized, take the iPhone X to an Apple store or Apple authorized service center. They will fix the issue and check if the issue is fixed. The services may be chargeable.

2. Force Restart

Force Restarting the iPhone X can fix issues with swipe up. This is to be done as follows.

  1. Press and quickly release the volume up button.
  2. Press and quickly release the volume down button
  3. Then, press and hold down the side button on your iPhone X until the Apple logo appears. This can take 10-15 seconds.
  4. Check if the iPhone X Swipe up issue is resolved or not.

Note: Instead of step 1 and step 2, you can alternatively press the Home and On/Off buttons simultaneously.

3. Charge the Device

Sometimes, by charging the iPhone X device, swipe up issue gets resolved on its own. This is explained below.

  • Connect the iPhone X to the charger unit.
  • Plugin the charger unit to the power socket and switch it on.
  • Wait for 60 minutes or so. If you do not see the charging icon displayed on the screen within this period, check and ensure that the USB cable, jack, power cable, etc, are connected firmly.
  • Check if the swipe up issue is resolved or not.

4. Move to a Different Area

Sudden temperature drop can cause the swipe up issues. To fix this issue, do the following.

  • Move to a different room or area.
  • Check if the swipe up issue is resolved or not.

5. Device Firmware Update

Device Firmware Update (DFU) can fix swipe up issues. The Device Firmware Update process is explained below.

  1. Connect the iPhone X to a computer or laptop that has got the latest version of the iTunes app installed.
  2. Open iTunes.
  3. You need to press and immediately release the Volume Up button, followed by pressing and immediately releasing the Volume Down button.
  4. Now, press and hold the side button, until the recovery-mode screen is displayed to you.
  5. Locate and select your device name.
  6. A menu with 3 options, “Cancel”, “Restore” or “Update”, will be displayed to you. Select “Update” from this menu. Your computer will reinstall the device software within the next 15 minutes or so.
  7. Check if the iPhone X swipe up issue is fixed or not.

6. Restore Device Firmware

Restoring the Device Firmware to the factory settings is the last resort if all the previous methods to fix the swipe up issue has failed.

Note: This causes all data on your mobile to be lost. If you have any backup of the data, you may be able to restore data to some extent.

  1. Connect the iPhone X to a laptop or computer with the Apple iTunes app installed.
  2. Open iTunes.
  3. Then, press and immediately release the Volume Up button. Then, press and immediately release the Volume Down button.
  4. Now, press and hold the side button until the recovery-mode screen is displayed.
  5. Locate and select the iPhone X in iTunes.
  6. A menu with the following three options, “Cancel”, “Restore” or “Update”, will be displayed. Select the “Restore” menu option.
  7. Your computer will reset all of the device software to the factory settings, within the next 15 minutes or so.
  8. Check if the iPhone X swipe up issue is fixed or not.

Conclusion: Some iPhone X users have complaints that swipe up is not working. It is quite annoying when this happens. Minor software glitches are the main cause of this issue.

This issue can be fixed easily by different methods. The simplest solution is to Swipe up from the white horizontal bar at the very bottom of the device. Force restarting (or hard resetting) is another method.

On devices with the Face ID recognition system, you need to move to another area that is well lit to resolve the Face ID issues. Charging the iPhone X for around 60 minutes or so can also fix the swipe-up issue in many cases. If there is a sudden drop in temperature, move to another area that has a higher temperature than the current room temperature.

Device Firmware Update can fix the swipe up issue in almost all cases. This is done by connecting your iPhone X to a laptop or computer with the Apple iTunes app and then updating the device firmware. Device Firmware Restoration is the last resort. This causes all data on the device to be lost.

Fix iPhone X Can’t Restore Backup Problem

Some iPhone X users have complained that they were unable to restore from the backup source. Though it is quite rare, sometimes this problem does happen.

Causes of iPhone X Can’t Restore Backup Problem

Fix iPhone X can’t restore the backup problem is mainly caused by Wi-Fi problems. The cellular mobile internet connection can not be used to restore the backup in a majority of cases, as the internet is slow with cellular connections.

How to Fix iPhone X Can’t Restore Backup Problem?

iPhone X can’t restore backup problem can be fixed by different methods. Some of the fixes are listed below.

Fix iPhone X Can't Restore Backup Problem

1. Check WiFi Connectivity

WiFi problems cause restore problems for the iPhone X. Please follow the instructions given below to avoid this.

  • Make sure that the router or modem is switched on.
  • Check and ensure that the internet connectivity indicator light on the router or modem is “ON”.
  • Make sure that the WiFi password is correctly entered on the iPhone X. If not, re-enter the WiFi password and make sure that the WiFi connectivity is working.
  • Check if the iPhone X can restore the data from the backup or not.

2. Update to the Latest Version of iOS

Make sure that you have the latest version of iOS installed on your iPhone X. this can be done as follows.

  • To find out the iOS version installed on your iPhone X device, go to the Settings app. Then, tap on “General” and then tap on “About”.
  • To install the IOS update, go to the Settings app. Tap on “General”, then tap on “Software Update”. If there are any updates available, it will be shown there. If so, tap on “Download and Install”.
  • Follow the prompts and install the updates, if any. You may be asked to enter the pass code.
  • Check if the iPhone X can’t restore the backup problem is fixed or not.

3. Update iOS Automatically

iOS 12 or later versions, allow automatic updates. Note: Even if the automatic iOS update is enabled, some updates may need to be installed manually.

To enable automatic updates, do the following.

  • Go to the Settings app.
  • Tap on “General”
  • Tap “Software Update”.
  • Now, tap “Automatic Updates”.
  • Check if the iPhone X can’t restore the backup problem is resolved or not.

4. Restart all your devices

Sometimes by restarting all your devices, the restore errors can be fixed. This needs to be done as follows.

  • Switch of the laptop or computer if you are trying to restore using iTunes from the computer or laptop.
  • Switch of the router or modem.
  • Make sure to switch off the iPhone X mobile device also.
  • Now switch on all of the devices that were switched off in the earlier steps.
  • Check if the iPhone X can’t restore the backup problem is fixed o it still persists.

5. Disable Third-party Security Software

Third-party security software can make problems with the restore process. To fix this issue, do the following.

  • Disable any third-party security software or antivirus programs.
  • Check if your iPhone X can restore the data from the backup or not.

6. Update Timezone Settings

Wrong timezone settings on computers or laptops with iTunes can affect the restore process on iPhone X mobiles. To fix this issue, do the following if you are connected to iTunes to restore data.

  • Set the time zone, date, and time correctly on your computer or laptop.
  • Open the iTunes app.
  • Check if the iPhone X restore process is working correctly or not.

7. Use an Administrator Account

Using an administrator account is another solution to avoid restore errors while using iTunes. This is to be done as follows.

  • Close all applications on the laptop or computer that has the iTunes application.
  • Log out.
  • Log in as an administrator.
  • Check if the iPhone X can now restore the backup or not.

8. Update iTunes with the Latest Version

Updating iTunes with the latest version is another fix to restore problems. This can be done as explained below.

A. If you have Download iTunes from the Microsoft Store

iTunes versions from the Microsoft Store are updated automatically when new versions are released. You can manually check for updates as explained below.

  • Type “Microsoft store” into the search bar on the left side of the taskbar.
  • Select the “Microsoft Store” app.
  • Click on the three dots on the top right-hand side corner.
  • Click on the “Downloads and updates” sub-menu item, below the three dots.
  • Check if the iTunes is listed in the list of available updates.
  • Click on “Get updates”, if there are any updates available.
  • Wait for the update process to be completed.
  • Check if the iPhone X restore process works or not.

B. If you downloaded iTunes from Apple’s website

  • Open the iTunes app.
  • From the top menu bar of the iTunes app, select “Help”.
  • Now, select “Check for Updates”.
  • Follow the prompts and complete the installation of the latest version of iTunes.
  • Check if the iPhone X is now able to restore the data from the backup or not.

9. Contact Apple Support

If all the previous methods failed to fix the restore issue with your iPhone x, please contact the Apple Support. This is explained below.

  • Go to the nearest Apple support store or Apple-authorized service center.
  • Hand over the Apple iPhone mobile device to the support staff there.
  • Let them fix the issue for you.
  • Check if the iPhone X can’t restore the backup problem is resolved or not.

Conclusion: Some iPhone X users complain that they can’t restore from the backup. The reasons could vary across different users, though the main reason for the issue is related to WiFi connectivity.

iPhone X can’t restore the backup problem can be fixed easily. The first check is to make sure that WiFi connectivity is working. Updating the iOS to the latest version is another fix for the iPhone X restoration related problems. Updating the iOS update settings to automatic updates is another fix. Disable any third-party security software or anti-virus applications to avoid any possible conflict between the restore process and such software applications. Updating the timezone, date, and time is another fix to resolve restore errors on computers or laptops with iTunes. Using an administrator account instead of the guest account is another fix. Updating iTunes with the latest version is another fix to the restoration problems while using iTunes. You can manually check for the latest version of iTunes if you have downloaded it from the Microsoft store. You can also check and get the latest version of iTunes from the apple website also.

In case the problem can not be fixed by any of the methods mentioned above, take the mobile device to the nearest Apple store or Apple authorized service center.

Fix iPhone 8 Can’t Turn ON Problem

Some iPhone 8 users have complained that their mobiles devices does not turn on or is unresponsive. Though the reasons for this behavior can be different, the issue can be resolved easily in many cases. We will discuss the causes and the fixes for the unresponsive iPhone 8 that failed to turn on.

Causes of iPhone 8 Can’t Turn on Problem

Some of the causes of why iPhone 8 can’t turn on are listed below.

  • Software glitches.
  • Bad or broken charging unit or charging port.
  • Power outlet problems.
  • Battery problems.
  • Hardware problems.

How to Fix iPhone 8 Can’t Turn On Problem?

Fix iPhone 8 Can’t Turn ON Problem

iPhone 8 can’t turn on problems can be fixed by different methods. Some of the fixes are listed below.

Note: Make sure that the problem is not a screen or display-related issue, which is explained in some of the previously written articles on this website.

1. Change Charging Cable or Adapter

Sometimes, the charging cable or the adapter may be defective and prevent the battery from charging, thus causing turn on problems. To fix this issue, do the following.

  • Get a new charging cable and adapter.
  • Connect the iPhone 8 mobile to the charging unit and witch on the power supply.
  • Charge the iPhone 8 mobile for around one hour or so.
  • Check if the turn-on issue is fixed or not.

2. Charge Using a Computer or Laptop

If the mobile charging unit is problematic, by using a USB cable connected to a computer or laptop, the Apple iPhone 8 mobile device can be charged. This fixes the turn-on problems. This can be done as explained below.

  • Connect one end of the USB cable to the iPhone 8 mobile device and the other end to a computer or laptop.
  • Switch on the computer or laptop.
  • Wait for 60 minutes or so.
  • Check if the iPhone 8 can be turned on now or not.

3. Charge for 60 Minutes

Sometimes, by charging the Apple iPhone 8 mobile device, the turning on problems can be avoided especially if the problem is caused by charging problems. Charging needs to be done as follows.

  • Connect the Apple iPhone 8 mobile device to its charger unit.
  • Connect the charger unit to the power socket.
  • Now, switch on the power supply to the charger.
  • Wait for around 60 minutes or so. If the charging icon is not displayed within this period, check and confirm that the USB cable, cable, jack, etc, are firmly connected.
  • Check if the Apple iPhone mobile device can be turned on or not.

4. Use a Different Power Outlet

Rarely, the power supply from the outlet may not be working. There may be some loose contact or connection problems. To fix this issue, do the following.

  • Connect the mobile device to the charging unit.
  • Connect the charging unit to the power outlet, that is different from the one used earlier.
  • Wait for around 60 minutes or so.
  • Check if the mobile device can be turned on or not.

5. Force Restart

Force Restarting the iPhone 8 can fix the turn-on problems in many cases. Force restarting is explained below.

  1. Press and quickly release the volume up button.
  2. Press and quickly the volume down button
  3. Then, press and hold down the side button on the iPhone 8 device until the Apple logo appears. This may take approximately 10 to 15 seconds.
  4. Check if the iPhone 8 turn on issue is fixed or not.

5. Device Firmware Update

Device Firmware Update (DFU) can fix the iPhone 8 turn on problems in many cases, especially those related to software bugs or glitches. The Device Firmware Update is explained below.

  1. Connect the iPhone 8 device to a computer or laptop with the latest version of the Apple iTunes app installed.
  2. Open the Apple iTunes app.
  3. You need to press and immediately release the Volume Up button, followed by pressing and immediately releasing the Volume Down button.
  4. Now, press and hold the side button, until the recovery-mode screen is displayed to you.
  5. Locate and select your device name.
  6. A menu with the following options will be displayed to you. The three menu options are “Cancel”, “Restore” or “Update”.
  7. Select “Update” from the menu options. Your computer or laptop will now reinstall the device software on the mobile device. It may take 15 minutes or so.
  8. Check if the Apple iPhone 8 mobile device can be turned on or not.

6. Contact Apple Support

If all the previously mentioned solutions failed to turn on your iPhone 8 mobile phone, the problem may be with the mobile device hardware or battery. Please follow the instructions given below to fix the issue.

  • Take the Apple iPhone 8 mobile device to the nearest Apple store or Apple authorized service center.
  • Let them fix the issue. They may charge you for this.
  • Check if the iPhone 8 can be turned on or not.

Conclusion: iPhone 8 can’t turn on problems are reported by some users. There can be different reasons why iPhone 8 can’t be turned on. The reasons range from battery problems, mobile hardware problems, charging unit problems, minor software glitches, etc.

iPhone 8 can’t turn on problems can be fixed easily in a majority of the cases. Changing the charging cable and (or) adapter can fix the issue in many cases. Using a laptop or computer to charge the device also fixes the issue in some cases. By charging the iPhone 8 for an hour or so also fix the turn on issues in many cases. By using a different power outlet to charge the mobile device, iPhone 8 turn on problems can be avoided in some cases. Force restarting the mobile device is another fix to the turn-on problems with Apple iPhone 8. Device Firmware Update fixes the turn on problem son iPhone 8 in some cases.

If all the previous methods fail, it may be due to hardware or battery issues. You need to take the mobile iPhone 8 device to the nearest Apple Store or Apple-authorized service center to fix the issue.

Fix iPad Won’t Accept Wi-Fi Password Problem

Sometimes, the iPad devices refuse to accept the WiFi password. It will keep on asking you for the Wi-Fi network password. You will become frustrated after a few failed attempts.

We ill look into the causes of wireless password problems and how we can fix this issue.

Causes of Why iPad Won’t Accept Wi-Fi Password

There can be different reasons for the iPad not to accept the Wi-Fi password and refuse to get connected to the wireless network.

Minor software glitches, changed passwords, signal strength problems, etc, are some of the most common reasons for the iPad to not get connected to the Wi-Fi network.

How to Fix iPad Won’t Accept Wi-Fi Password Problem?

Fix iPad Won't Accept Wi-Fi Password Problem

There are different methods to fix the iPad won’t accept the Wi-Fi Password problem. Some of the fixes are listed below.

1. Force Restart the iPad

Restarting the iPad device can fix Wi-Fi password problems in many cases. This is known as force restarting and is done as follows.

  • Press and hold the power button (or side button), until you see the message “Slide to Power Off” on the screen.
  • Drag the power icon from left to right side.
  • Your iPad device will now switch off.
  • Press and hold the power button (or side button), to switch on the iPad,
  • Check if the Wi-Fi password issue is fixed or not.

2. Router or Modem Power Cycling

Restarting the router or modem after switching it off is known as power cycling. This process can help fix the Wi-Fi-related errors in a large number of cases. Power cycling is explained below.

  • Turn off your router or modem.
  • All power cables of the router or modem should be removed.
  • Re-connect the power cables, after two minutes.
  • Switch on the router or modem.
  • Check if the Wi-Fi network password issues are fixed or not.

3. Re-enter the Correct (Updated) Wi-Fi Password

Sometimes, the Wi-Fi password might have been changed, especially if you are trying to use the Wi-Fi network in your office. (You may not be aware of this change in the password if you are not in charge of the router or modem.) To fix this issue do the following.

  • If you are accessing the Wi-Fi from your office network, confirm the Wi-Fi password with the respective authority. Get the password in writing or by email or SMS to you, so that mistakes do not creep in.
  • Enter the given Wi-Fi password, when prompted.
  • Check if the password error is fixed or not.

4. Turn Wi-Fi Off And then Turn On

turning off and then turning on the iPad WiFi can fix minor problems with network connectivity. The procedure to do this is explained below.

  • Open the Settings app on the iPad.
  • Tap on “Wi-Fi”.
  • Tap the toggle bar switch to turn off the Wi-Fi.
  • Again, Tap the same toggle bar, to switch it on.
  • Check if the password error problem is resolved or not.

5. “Forget Wi-Fi Network”

Sometimes, “Forget This Network” option can help you to fix the iPad password errors. You need to do the following procedure to “Forget This Network”.

  1. Open the “Settings” app on your iPad.
  2. Tap on “Wi-Fi”.
  3. Tap on the blue “i” button, next to your Wi-Fi name.
  4. Next, tap on “Forget This Network”.
  5. Your iPad will now restart now.
  6. Repeat step 1 and step 2.
  7. Tap on the name of the Wi-Fi network.
  8. Enter the Wi-Fi password.
  9. Check if the password issue is fixed or not.

6. Reset Network Settings of the iPad

Resetting the iPad’s network settings can resolve password errors in many cases. Wi-Fi, Bluetooth, etc, changes to default factory settings, once you do the network resetting. Proceed as per the instructions given below to do the network resetting.

  • Open the Settings app on the iPad.
  • Tap on the “General”.
  • Tap on the “Reset”.
  • Next, tap on the “Reset Network Settings”.
  • Enter the passcode for the iPad device.
  • Again, tap on “Reset Network Settings”, to confirm.
  • Your iPad will turn off and turn on.
  • Check if the password issue is fixed or not.

Note: After resetting the network settings, you need to re-enter the Wi-Fi password and also need to reconnect the Bluetooth devices.

7. Turn Airplane Mode on/off

Turning Airplane Mode on and then making it off fixes the WI-Fi password errors for some iPad users. This is explained below.

  • Open the Settings app on the iPad.
  • Turn on the Airplane Mode.
  • Wait a few seconds.
  • Now, turn off Airplane Mode.
  • Check if the Wi-Fi password error is fixed or not.

8. Firmware Update for the Router

As one of the last resorts to resolve the WI-Fi Password error, you may need to update the firmware of the Router or modem. Note: This action may cause irrecoverable damage to the network settings and should be done by only those are experienced with such things.

  • Read the manuals supplied with the router or modem. Follow the instructions as per the manual.
  • In case of any clarifications, visit the support section on the manufacturer’s website. Raise a ticket and wait for the support team to come up with the required solution.
  • Check if the problem is fixed or not.

Conclusion: Rarely, some iOS Devices like iPad won’t accept the Wi-Fi password at certain times. This problem is caused by different reasons like some minor software errors, password changes, signal strength problems, etc. It can be fixed easily,

Restarting the iPad is a very simple fix that works in many cases. Power cycling the router or modem is another fix. Reentering the correct Wi-Fi Password is another fix. Turning off and turning on the Wi-Fi is yet another solution. “Forget This Network” menu option can fix the iPad password errors in a large number of cases. Resetting the iPad’s network settings is another fix. Turning the Airplane Mode on and then to off, the issue with WiFi password problems can be fixed in some cases. Firmware update for the router or modem may be required in some cases to fix the iPad Won’t Accept Wi-Fi Password issue.

Fix iPhone 8 Can’t Turn OFF Problem

Some Apple iPhone 8 users have complained that their mobile device won’t turn off. Sometimes the device gets frozen. Though the cause for this behavior varies, this problem can be fixed easily.

In most cases, the problem is caused by minor software glitches. Sometimes, faulty apps cause the device to freeze and does not turn off.

How to Fix iPhone 8 Can’t Turn OFF Problem?

Fix iPhone 8 Can't Turn off Problem

iPhone 8 Can’t Turn off Problems can be fixed by different methods. Some of the fixes are listed below.

1. Power Off

  • Press and hold the “Sleep/Wake” button for around 10 seconds.
  • See if the slider bar appears. If the slider appears, you can shut down and restart the mobile or quit the problem causing app by pressing and holding the Home button.

2. Force Restart

  1. Press and quickly release the “Volume Up” button.
  2. Press and quickly release the “Volume Down“ button.
  3. Now, press and hold the Sleep/Wake button (side button) until the Apple logo appears.
  4. If the above steps do not work, press and hold the “Sleep/Wake” button and the “Volume Down“ button simultaneously for about 10 to 15 seconds. The Apple logo will appear in most cases.
  5. Restart the mobile and check if the problem is fixed or not.

3. Drain the Battery

Draining the battery fully and then recharging it can help fix the issue in some cases. This is to be done as explained below.

  • Let the battery drain fully by itself.
  • Then recharge the mobile.
  • Check if the problem is fixed or not.

4. Shut down the iPhone 8 from the App

By shutting down the iPhone 8 using the Settings app can sometimes fix the issue. This can be done as explained below.

  • Go to the Settings app on your iPhone 8.
  • Tap on “General”.
  • Scroll down and tap on “Shut down”.
  • Now, the red button to ‘slide to shut down’ appears,
  • Turn off the mobile device using this slider.
  • Check if the problem is fixed or not.

5. Charge the iPhone 8

By charging the mobile device, the problem with turning off the iPhone 8 can be fixed in some cases. The procedure is explained below.

  • Connect the iPhone 8 with its charger. Make sure that the USB cable, power cable, etc, are connected firmly.
  • Connect the charger to the power socket.
  • Switch on the power supply to the charger unit.
  • Wait for an hour for the charger to charge the mobile battery.
  • Check if the problem is fixed or not.

6. Turn on Assistive Touch

Turnin on assistive touch can fix the turn off problems in some cases. This is explained below.

  • Go to the Settings app. Tap on “Accessibility”. Next, tap on “Touch”. Now, select “AssistiveTouch” to turn it on.
  • Use “Hey Siri” to say, “Turn on AssistiveTouch.” 
  • Go to the Settings app. Tap on “Accessibility”. Select the Accessibility Shortcut and turn on AssistiveTouch. 
  • Check if the problem is fixed or not.

7. Device Firmware Update

Device Firmware Update (DFU) can resolve the turn-off problems in a large number of cases. The Device Firmware Update process is described below.

  • Connect the iPhone 8 to a computer or laptop that has got the latest version of the Apple iTunes application installed.
  • Open the iTunes app.
  • Press and immediately release the Volume Up button, followed by pressing and immediately releasing the Volume Down button.
  • Press and hold the side button, until the recovery-mode screen is displayed to you.
  • Locate and select your iPhone 8 device name.
  • A menu “Cancel”, “Restore” or “Update” will be displayed to you. You need to select “Update” from this menu. Your computer will reinstall the device software within 15 minutes or so.
  • Check if the iPhone 8 turn off issue is fixed or not.

8. Restore Device Firmware

Restoring the Device Firmware to the factory settings may the last resort if all the previously described methods failed to fix the turn off problem with your iPhone 8 mobile device.

Caution: Restoring device firmware causes data on your iPhone 8 mobile phone to be lost.

  • Connect the iPhone 8 mobile device to a laptop or computer with the latest iTunes app.
  • Open the iTunes appl.
  • Press and quickly release the Volume Up button. Then, press and quickly release the Volume Down button.
  • Press and hold the side button until the recovery-mode screen is displayed.
  • Locate and select the iPhone 8 device name in iTunes.
  • A menu with “Cancel”, “Restore” or “Update” options will be displayed to you.
  • Select ” Restore “.
  • Your computer or laptop will reset the iPhone 8 device software to the factory settings, in the next 15 minutes or so.
  • Check if the iPhone 8 turn off issue is resolved or not.

9. Contact Apple Support

If all other methods failed to turn off the iPhone 8, please take your mobile device to any of the Apple Support offices, near to you. This is explained below.

  • Go to the nearest Apple-authorized service center or Apple support store.
  • Let them fix the issue for you.
  • Apple may charge you for this service.
  • Check if the iPhone8 can be turned off and then turned on, or the problem still persists.

Conclusion: Some iPhone X users have complaints that their iPhone 8 mobile won’t turn off. i.e. the device gets frozen. Though the cause of the problem may vary across different devices, it can be fixed.

By pressing the Sleep/Wake button, the iPhone 8 can be turned off. force restarting the mobile is another method to fix the turn off problems with iPhone 8. Draining the battery fully and then recharging the mobile device is another fix to the ‘turn off issues’ with your iPhone 8. By charging the mobile device for an hour or so can also fix the turn off problems for the iPhone 8 in some cases. shutting down the mobile device using the settings app is another fix to resolve the turn off issues with your iPhone 8. Turning on the assistive touch is yet another fix. Device Firmware Update is another method to avoid turn off issues with iPhone 8 mobiles. Device Firmware Restoration is another fix, but it causes all data on the mobile device to be lost permanently.

In case the problem can not be fixed by any of the methods mentioned above, take the mobile device to the nearest Apple store or Apple authorized service center.

[Fix] Chrome Error Code: DNS_PROBE_FINISHED_NXDOM

Some Chrome users have complaints of failure to load some web pages. They also get the error DNS_PROBE_FINISHED_NXDOMAIN.

What Is the DNS_PROBE_FINISHED_NXDOMAIN Error?

All devices connected to the internet have an IP address. DNS is the abbreviation for Domain Name System that is used to locate the website address corresponding to an IP address. Hence, users can use easily memorable domain names of the websites instead of IP addresses.

For example, 208.80.154.224 is the IP address corresponding to the website, wikipedia.org. You can easily remember and type this website address into your browser, instead of typing the IP address numbers that are hard to remember. The background work is handled by DNS. It converts the web site address to the corresponding IP address.

[Fix] Chrome Error Code: DNS_PROBE_FINISHED_NXDOM

1. Use the Advanced System Repair Tool

Advanced system repair tools help you to scan your system and will automatically fix errors.

Follow the steps below to download and install Advanced System Repair tool.

  • Go to the web site, https://advancedsystemrepair.com/.
  • Click “Download”.
  • Click on “Save File”.
  • Now, click on the saved file name.
  • Click “Run”.
  • Click on “Yes” to confirm.
  • Now, click on “Continue”.
  • Select the required “Install options” or go with the default options.
  • Click on “Install and Scan Now”.
  • Accept the Privacy policy by click on on the radio button.
  • Follow the prompts and install Advanced System Repair tool.
  • Scan and fix any errors on your computer.
  • Restart the computer.
  • Check if the DNS_PROBE_FINISHED_NXDOMAIN error is fixed or not.

2. Update Chrome to the Latest Version

[Fix] Chrome Error Code: DNS_PROBE_FINISHED_NXDOM

By updating Chrome with the latest version, the DNS errors can be avoided in some cases. Though the Chrome normally gets updated automatically, sometimes you may need to manually check and update the browser. This can be done as explained below.

  • Click on the three dots on the top right side of the browser.
  • Click on “Help.
  • Now, click on “About Google Chrome”.
  • Now the browser will check for any pending updates.
  • If there are any pending updates, it will alert you. You can then install the pending update. If there are no available updates, the message “Google Chrome is up to date” will be displayed to you.
  • Check if the DNS error is fixed or not.

3. Flush DNS Cache

Outdated or corrupted DNS cache can cause errors in many cases. To fix this issue, do the following.

  • Type “Command Prompt” without the quotes into the search bar inside the taskbar.
  • Select “Run as administrator” on the right side of “Command Prompt, from the list of displayed menu options.
  • Click “Yes”.
  • Type “ipconfig /release” (without the quotes).
  • Press the enter key.
  • Type “ipconfig /flushdns” (without the quotes).
  • Press the enter key.
  • A message “Successfully flushed the DNS Resolver Cache” will be displayed.
  • Type in “ipconfig /renew” without quotation marks.
  • Press the enter key.
  • Close the command prompt by typing exit and pressing the enter key.
  • Check if the DNS related error is fixed or it still persists.

4. Clear Chrome Browser Cache

By clearing the Chrome case, the DNS errors can be fixed in many cases. This is to be done as explained below.

  • Click on the three dots on the top right side of the browser.
  • Click on “More tools”.
  • Select “Clear browsing data”.
  • Click on the “Advanced” tab.
  • Check “Cookies and other site data” and “Cached images and files”.
  • Click on “Clear data”.
  • Check if the error is fixed or not.

5. Clear Chrome DNS Cache

By clearing the Chrome DNS Cache, the errors can be fixed in a large number of cases. This can be done as explained below.

  • Type “chrome://net-internals/#dns” into the Chrome address bar on the top.
  • Click on the “Clear host cache” button.
  • Type “chrome://net-internals/#sockets” into the Chrome address bar on the top.
  • Now, click on the “Flush socket pools” button.
  • Check if the error is fixed or not.

6. Reset Windows Sockets

Resetting the Windows Sockets is another fix to resolve DNS errors. This is explained below. Caution: This may sometimes cause damages to computer data. Please take a system backup before doing this.

  • Type “Command Prompt” without quotation marks in the search bar inside the taskbar.
  • Select “Run as administrator” to the right of “Command Prompt”.
  • Click on “Yes”.
  • Type “netsh winsock reset catalog” without the quotation marks.
  • Press the enter key.
  • Ignore any messages that ask you to restart the computer.
  • Type “netsh int ipv4 reset reset.log” without quotation marks.
  • Press the enter key.
  • Type “netsh int ipv6 reset reset.log” without the quotation marks and press the enter key.
  • Type exit and press the enter key to close the command prompt window.
  • Restart the computer.
  • Check if the DNS related error is fixed or not.

7. Uninstall Third-Party Antivirus Application

By Uninstalling any third-Party Antivirus programs, DNS errors can be fixed in some cases. This can be done as explained below.

  • Type “add or remove” into the search bar inside the taskbar.
  • Click on “Add or remove programs”.
  • Scroll through the list of installed programs, displayed on the right side.
  • Click on the third-party antivirus program name.
  • Click on “Uninstall”, under the antivirus program name.
  • Again, click on “Uninstall” to confirm the action.
  • Follow the instructions and uninstall the third-party antivirus app.

8. Change to Chrome’s DNS

By changing the DNS to that of Chrome’s DNS, DNS errors can be fixed in many cases. this can be done as explained below.

  • Click on the Windows start button.
  • Click on the “Settings” icon (Gear icon).
  • Select the “Network & Internet” menu item.
  • Click on “Status” on the right side.
  • Click on the “Change adapter options”.
  • Right-click on the network icon.
  • Select “Properties”.
  • Click on “Internet Protocol Version 4 (TCP/Ipv4)”.
  • Click on the “Properties” button.
  • Then, click on “Use the following DNS server address”.
  • Type the following values to the Preferred DNS server; 8.8.8.8.
  • Type the following values to Alternate DNS server; 8.8.4.4.
  • Click on “OK”.
  • Click “Close”.
  • Close any open windows.
  • Restart the computer.
  • Check if the DNS_PROBE_FINISHED_NXDOM error is fixed or not.

Conclusion: Some Chrome users have complaints about getting the error DNS_PROBE_FINISHED_NXDOMAIN. This mainly happens due to DNS related errors. It can be fixed by different methods, as explained below.

The advanced system repair tool can be used to check and fix any errors on your computer, thus fixing the DNS errors also. By updating the Chrome browser with the latest version, the DNS related errors can be avoided. Flushing the DNS cache is another fix. Clearing the Chrome browser cache is also helpful to fix DNS errors. Clearing the Chrome browser DNS is another fix to resolve the DNS_PROBE_FINISHED_NXDOMAIN error. Windows sockets can be reset to fix the DNS errors. Uninstalling the third-party antivirus program also fixes the DNS related errors. Changing the DNS to that of Google Chrome is another fix for the DNS_PROBE_FINISHED_NXDOMAIN error.

Fix iPhone X Won’t Unlock Problem

Some users have complained that their iPhone X isn’t unlocking or it is totally unresponsive. Some others complain that the display is black. In such cases, your efforts to unlock the iPhone X with the Face ID, screen unlocking methods, etc, does not work. You are unable to call anybody, receive any calls, use any of the apps, etc. You are left with an iPhone that just doesn’t serve its purpose. It is quite frustrating!

We will discuss why iPhone X won’t unlock and how we can fix the issue in this article.

Causes of iPhone X Won’t Unlock

Minor software problems are the main reason why your iPhone X does not unlock. The rapid temperature drop is also a cause of unresponsive display.

Rarely, hardware issues also cause this problem. If any external object falls on the display, it may cause problems.

Update the iOS

You should make sure that you have the latest iOS version of the operating system software installed on your iPhone X device. If the display screen is locked, unlock the display by any of the fixes given below and then update the iOS. iOS can be updated as explained below.

  • Go to the settings app.
  • Tap on “General”.
  • Then, select “Software Update”.

How to Fix iPhone X Won’t Unlock Problem?

Fix iPhone X Won't Unlock Problem

Before proceeding with the fixes given below, make sure that the display screen of the mobile device is clean. Remove any improper screen protector or case that causes a problem with the touch functionality of the mobile device.

iPhone X Won’t Unlock Problem can be fixed by different methods. Some of the most common fixes are discussed below.

Swipe up from the White Horizontal Bar at the Very Bottom of iPhone X’s Screen

Sometimes, the screen may be locked because of swiping problems. The proper method to swipe the display screen is explained below.

A. If Face ID Recognizes your Face

  • iPhone X will display a message “swipe up to open“.
  • Swipe up from the very bottom of the screen.
  • Enter the passcode, when prompted.
  • Check if the iPhone X is unlocked or not.

B. If your Face isn’t Recognized

  • iPhone X will display the message “swipe up to unlock“. The lock symbol will be displayed near the top of the screen. Move to a brighter location, so that the device can recognize your face. If the device recognizes your face now and the display issue is still not fixed, try any of the fixes given in this article.
  • If your face is still not recognized, you can not do much on your own. Take the iPhone X device to the nearest Apple store or Apple authorized service center. Get it serviced and make sure that the display issue is fixed. You may be charged for the services rendered.

2. Move to a Different Area

A sudden drop in the temperature of the device can cause the display to be locked. To fix this issue, do the following.

  • Move to a different room if you are inside any building.
  • Move to another area if you are outside of any building.
  • Check if the locked display issue is fixed or not.

3. Hard Reset / Restart

Hard Resetting the iPhone X can fix the unresponsive behavior. This needs to be done as follows.

  1. Press and release the volume up button, quickly
  2. Press and release the volume down button, quickly.
  3. Now, press and hold down the side button until the Apple logo appears (it may take 10-15 seconds).
  4. Check if the iPhone X Won’t Unlock Problem is resolved or not.

Note: Instead of steps 1 and 2, you may press the Home and On/Off buttons at the same time.

4. Charge the Device

Sometimes, you can fix the display issues by charging the iPhone X device. This is explained below.

  • Connect the iPhone X to its charger.
  • Plugin the charger to the power socket.
  • Switch on the charger.
  • Wait for an hour for the device to get charged. If you do not see the charging screen appear within an hour, check the connecting jack, power adapter, and the USB cable. Make sure that they are connected firmly. If you suspect any problem, try to get another charging device that is compatible with your iPhone X.
  • Check if the display issue is resolved or it still persists.

5. Device Firmware Update

Device Firmware Update (DFU) can fix most of the iPhone X problems, The Device Firmware Update procedure is explained below.

  1. Connect the iPhone X to a computer or laptop which has got iTunes installed.
  2. Open the iTunes application.
  3. iPhone 8 or later iPhone users need to press and quickly release the Volume Up button, followed by pressing and quickly releasing the Volume Down button.
  4. Then, press and hold the side button on your iPhone X, until you see the recovery-mode screen.
  5. Locate and click on the device name, to select it.
  6. When you see the message asking you to select any one the following menu options; “Cancel”, “Restore” or “Update”, select “Update”. Your computer will try to reinstall the software without erasing your data. Wait for 15 minutes or so.
  7. Redo step 3 and 4.
  8. Check if the iPhone X Won’t unlock the problem is fixed or not.

Conclusion: iPhone X won’t unlock problem occurs to some iPhone users. The main reason for this problem is minor software glitches. Sometimes, hardware damage also causes this problem. Temperature drops can also cause the display to be locked.

iPhone X won’t unlock problem can be fixed easily. When your iPhone X shows the lock icon, swipe up from the white horizontal bar at the very bottom of the iPhone X’s Screen to fix the issue. Hard resetting is another method to fix the locked iPhone X. Device Firmware Update is another method to fix iPhone X won’t Unlock Problem.

Devices with Face recognition systems may have issues if you are in a darker area. You need to move to a properly lighted area to get the issue fixed. Sometimes, charging the iPhone X device for an hour or so resolves the locked display issues. Moving to another room or area can also fix the locked display issues if there the problem is caused by any sudden drop in temperature.

Fix iPad Unable to Join Network Problem

Sometimes, when you try to connect your iPad to the Wi-Fi network, it won’t get connected. It is quite annoying if you do not get connected to the internet.

We will look into the possible causes of network problems and how to fix this network issue.

Causes of iPad Unable to Join Network

Some of the most common causes of iPad unable to join the wireless network are listed below.

WI-Fi may be set to “OFF” in some cases, leading to wireless network connectivity problems. Wireless network signal strength problems are the cause of the error in some other cases.

Minor software problems with the Router or Modem may be the cause of network issues. Network settings of the iPad device can also cause network errors. Brocken Wi-Fi antenna is another cause of the error. A changed WiFi password is another cause of network connectivity errors.

How to Fix iPad Unable to Join Network Problem

Fix iPad Unable to Join Network Problem

The problem of the iPad unable to join the network can be fixed easily by different methods. Some of the methods to fix iPad network issues are listed below.

1. Set WiFi to ON

It is quite possible that you may have accidentally (or intentionally) made the WiFi to “OFF”. In such cases, do the following steps to fix the issue.

  • Go to the Settings app.
  • Tap on Wi-Fi.
  • Make sure that the Toggle bar is green in color. i.e. Wi-FI is set to ON.
  • Check if the network issue is fixed or not.

2. Force Restart iPad

Force restarting the iPad can fix network problems in many cases. This can be done as follows.

  • Press and hold the power button until the “Slide to Power Off” message appears on the screen.
  • Now, Drag the power icon slider from the left side to the right side, to shut down the iPad device.
  • Wait for a few seconds for the iPad to switch off.
  • Now, press and hold the power button, to make the iPad switch on.
  • Check if the network issue is resolved or not.

3. Remove Case or Covering from the iPad

The case or cover of the iPad may sometimes cause wireless network signal strength problems. Do the following to fix the issue in such cases.

  • Remove the case or covering from the iPad.
  • Check if the network issue is fixed or not.

4. Move Closer to the Router or Modem

The weak wireless signal can cause network issues, especially if you are away from the router or modem. TO fix this issue, do the following.

  • Move to a place that is close to the router or modem.
  • Check if you can get connected to the WiFi network or not.

5. Turn Wi-Fi Off And then Re-Connect

In some cases, iPAd WiFi needs to be switched off and then switched on to fix minor problems with network connectivity. This can be done as follows.

  • Open the Settings app.
  • Tap Wi-Fi.
  • Then, tap the toggle bar switch to the right of “Wi-Fi”, to turn it off.
  • Tap the same toggle bar again to switch it on.
  • Check if the network problem is resolved or not.

6. Power Cycling the Router / Modem

Sometimes, restarting the router or modem can fix the wireless network issues. This process is known as power cycling. Power cycling is to be done as follows.

  • Turn off the router or modem.
  • Unplug the power cable of the router or modem.
  • Wait for two minutes.
  • Reconnect the power cables.
  • Turn on the router or modem.
  • Check if the network issue is fixed or not.

7. “Forget Wi-Fi Network”

Sometimes, the Wi-FI password would have been changed recently. In such cases, it is not possible to get connected to the WiFi network with the stored password. You need to do the following procedure to get the WiFi network issue resolved in such cases.

  • Open the Settings app.
  • Tap on Wi-Fi.
  • Then, tap the blue “i” button next to the Wi-Fi network name.
  • Now, tap “Forget This Network”.
  • Your iPad will now restart.
  • Go back to the Wi-Fi menu inside the Settings app.
  • Tap on the name of your Wi-Fi network.
  • Enter the Wi-Fi password.
  • Check if the network connection issue is fixed or not.

8. Reset iPad’s Network Settings

Resetting the network settings of the iPad device can fix network issues in some cases. Wi-Fi, Bluetooth, etc, will be changed to the default factory settings, once you do resetting. To reset the network settings, proceed as per the instructions given below.

  • Open the Settings app.
  • Tap on “General”.
  • Then. tap on “Reset”.
  • Now, tap on “Reset Network Settings”.
  • Enter your iPad device passcode.
  • Tap on “Reset Network Settings” to confirm.
  • Your iPad will turn off now.
  • iPad will then turn on, with the default network settings.
  • Check if the network issue is fixed or not.

Note: After resetting the network settings, you need to re-enter the Wi-Fi password and also need to reconnect the Bluetooth devices.

9. Repairing iPad Wi-FI Antenna

In certain cases, the broken iPad Wi-Fi antenna may be the cause of network issues. To fix this issue, do the following.

  • Take your iPad to the nearest Apple Store.
  • They’ll fix the iPad. You may need to pay for the service.
  • Check if the iPad is able to join the network or not.

Conclusion: Occasionally, some iPad users complain that they are unable to join the network. In most cases, it may be due to Wi-Fi problems. Software glitches, Wi-Fi password changes, broken Wi-Fi antenna, iPad settings, etc, are some of the other causes of the network error.

iPad network connectivity problems can be fixed easily. Sometimes, the Wi-Fi may be set to “OFF”. in such cases, you need to make this value to “ON”. Restarting the iPad is the most simple fix to network issues. Turning off and then turning on the WiFi can fix the network error in many cases. Removing the iPad device cover or case can help fix network issues, especially if the wireless network signal is week. Moving closer to the router or modem is another fix to resolve the network issues. Restarting the router or modem is yet another fix tot he WiFi network issues.

If the stored WiFi password was changed, you need to update the stored passcode in your iPad device. This can be done by going in for the “Forget Wi-Fi Network” menu option and then re-entering the password. Resetting the network settings in your iPad device can fix network issues in some cases. Physical damages like a broken WiFi antenna can also cause network problems. Such problems can be fixed only by an Apple store.

How To Fix Windows Error Code 80004001 Easily

Windows Error code 80004001 is mainly caused by poorly configured Windows operating system files. This error may occur when you try to update an older Windows application or run an old application. The system may automatically restart and cause the Blue Screen of Death error in some cases.

Causes of Windows Error Code 80004001

Windows operating system files may get damaged or corrupted due to virus or incorrect registry entries, resulting in 80004001 error code.

How To Fix Windows Error Code 80004001 Easily

Windows Error Code 80004001 can be fixed easily by different methods. Some of the fixes are given below.

1. System File Checker (SFC)

Running the System File Checker tool can fix the 80004001 error in many cases. This is explained below.

  • Type “command prompt” into the search box inside the taskbar.
  • Click on “Run as administrator”, to the right side of the “Command Prompt”.
  • Click “Yes” to confirm.
  • At the newly opened windows, type the following command.
  • sfc /scannow
  • Press the enter key.
  • Wait for the command to be executed fully.
  • Restart the computer or laptop.
  • Check if the error is fixed or not.

2. Clean Booting

By clean booting, you can resolve the Windows 80004001 Error Code. The process of clean booting is explained below.

  1. Press Windows and R keys, together.
  2. Type “msconfig” (without the quotation marks) into the box.
  3. Click the “OK” button.
  4. Click the “Services” tab.
  5. “Hide all Microsoft services” checkbox should be checked.
  6. Click the “Disable all” button.
  7. If you are using the Windows operating system like Windows 7 or any other prior windows versions, proceed to step 9. Otherwise, go to step 8.
  8. Click on the “Startup” tab. Then, click on the “Open Task Manager”. “Enabled” processes need to be changed to “Disabled”, by clicking on the process name and then clicking the “Disable” button. Repeat this for all “Enabled” processes. Before you disable any process, please take note of the process name. Close the window and click the “Apply” button and then the “OK” button.
  9. Windows Vista or Windows 7 or any other older Windows version users need to click on the “General” tab. Then, they need to click on the “Selective startup”. Uncheck the box, “Load startup items”. Close the window and make sure to click on the “Apply” button and then on “OK” button.
  10. Restart the computer or laptop.
  11. Now, enable all the Non-Windows services and programs that were disabled earlier. This needs to be done one by one and reboot the computer after each service or program is “Enabled”. Check if there is an error. If you encounter an error after any service or program is enabled, update the files for that service or program with the latest ones from the manufacturer. If there are no errors, enable the next service or program.
  12. Restart the computer or laptop.
  13. Check if the error is fixed or not.

3. Repair Windows

Repairing the Windows can fix the Error Code 80004001 in many cases. The steps involved in repairing the Windows operating system are explained below.

  • Insert installation media and restart the computer.
  • A message “Press any key to boot from CD or DVD” appears on your monitor.
  • Press any key.
  • Follow the prompts and choose “Repair Computer”.
  • Select “Troubleshooting” from the menu options.
  • Choose “Start Settings” -> “Restart”.
  • Once the computer is restarted, there will be a list of menu options.
  • Select “Safe mode” or “Safe mode with networking”.
  • Restart the computer.
  • Windows will automatically try to fix any errors.
  • Again, restart the computer.
  • Check if the error is fixed or not.

Conclusion: Error code 80004001 in Windows operating system is mainly caused by poorly configured system files. This happens when any files are infected with viruses or windows registry values are invalid. This can be fixed easily.

System file Checker utility can fix the Error code 80004001 in many cases. Clean booting the computer helps to fix the error in some cases. Repairing Windows is another method to fix Windows Error 80004001.